|top| Free: Astm D595798 Pdf
ASTM D5957-98 is a standard guide originally adopted in 1998 (and consistently reapproved, including 2005, 2013, and 2021) that outlines the best practices for conducting a "flood test". A flood test involves creating a temporary dam around a waterproofing installation, filling the area with water, and monitoring it for leaks over a set period.
Locates micro-punctures or compromised seams that are invisible to the naked eye.
All temporary or permanent drains within the test area must be securely plugged. 2. Setting Up Containment Barriers
To contain the water, temporary barriers must be constructed, and existing drainage must be sealed.
ASTM D5957-98 (Reapproved 2017) Standard Guide for Flood Testing Horizontal Waterproofing Installations astm d595798 pdf free
ASTM D5957 is the standard guide for flood testing horizontal waterproofing installations. It provides a systematic method to verify the water tightness of fully adhered or loose-laid waterproofing membranes. Contractors, engineers, and building inspectors use this test protocol before installing overburden like soil, pavers, or concrete.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
While the temptation for a free PDF is understandable, respecting copyright ensures that ASTM continues developing critical standards. For one-time use, the reading room or a $56 download is far safer and legally sound.
, officially titled the Standard Guide for Flood Testing Horizontal Waterproofing Installations , is the premier industry guideline used by engineers, contractors, and building inspectors to verify the watertightness of horizontal structures. First approved in 1998 and reapproved over the years (such as its ASTM D5957-98R21 iteration), this standard outlines the procedural steps required to construct a controlled temporary flood over a waterproofing membrane. By creating a short-term hydrostatic head of water up to 100 mm (4 inches) deep, inspectors can effectively verify whether the system will remain completely leak-free before protective layers or finishes are laid over it. ASTM D5957-98 is a standard guide originally adopted
is the definitive standard governing the quality control of horizontal waterproofing installations via field flood testing. Officially titled the Standard Guide for Flood Testing Horizontal Waterproofing Installations , this standard ensures structural components—such as plaza decks and parking garages—are completely watertight before final layers are built over them.
Using outdated or "free" versions of technical standards from unauthorized sources can lead to incorrect testing procedures or non-compliant engineering practices. Always use the latest version from official sources.
Primarily used for parking garages, plaza decks, and shower pans over habitable spaces. Important Exclusion: This standard explicitly states it is not intended for use on building roofing systems
The (e.g., green roof, parking deck, plaza deck)? All temporary or permanent drains within the test
To acquire a legitimate, fully compliant copy of the document, use the official industry portals:
Ensures that the contractor has followed proper waterproofing techniques.
A method to test the watertightness of waterproofing installations on horizontal surfaces with a slope of no greater than 20 mm/m (2% slope, or 1/4 inch per foot) . This includes structures like parking garages over living spaces and plaza decks over habitable spaces. It can test a variety of membrane types, including fully adhered sheet membranes, fluid-applied membranes, and loose-laid sheet membranes.