What (e.g., Windows 10, Windows 11) are you using?
Disconnect the VS890 scanner from your computer before running any installation files. Log into your PC with administrative privileges.
to a computer for firmware updates or data management, keep the following in mind:
Powers up directly through your vehicle’s OBD2 port. Why You Need the VS890 Driver etop miniscan driver vs890
Put your VS890 scanner into "Update Mode" by holding down the designated button combination while plugging in the USB cable.
Open your VS890 software settings and manually change the targeted COM port to match the number displayed in your Windows Device Manager. Best Practices for Safe Operation
The Etop Miniscan VS890 is a highly reliable, pocket-sized OBD2 code reader used by DIY mechanics and professionals alike to diagnose vehicle engine faults. However, the hardware is only as good as the software that connects it to your computer. To read live data streams, update the device firmware, or export diagnostic trouble codes (DTCs), you must have the correct properly installed on your PC. What (e
: Most current driver packages support Windows XP, Vista, 7, 8.1, and 10 (both 32-bit and 64-bit). Important Note : Some versions of the are explicitly marked as non-upgradable
Searching legacy driver databases and Chinese OEM forums suggests the might be:
Upon reboot, press or F7 to select "Disable driver signature enforcement." 3. Run the Installer Disconnect the VS890 scanner from your computer. to a computer for firmware updates or data
Look for an entry matching the scanner or a generic "USB Serial Port" followed by an assigned COM port number (e.g., COM3). If it appears without error icons, your driver is correctly installed. Troubleshooting Common Driver Issues
When syncing data to your PC, ensure the scanner is disconnected from the car's OBD2 port. The scanner should run entirely on USB bus power during desktop operations.
The scanner is a popular "budget" tool for DIY mechanics due to its specific hardware and software capabilities: