Bnd-50 Se36 Instructions
The is a weekly digital timer socket designed for automating household electrical appliances. This device, typically branded under names like Bainian , allows you to set schedules for your devices to turn on and off automatically according to a weekly program, helping you save energy and manage appliances like lights, water pumps, heaters, or other electronics.
Release the CLOCK button once the master time is correctly logged. Step 3: Programming Custom ON/OFF Schedules BND-50/SE36 Go to product viewer dialog for this item. allows you to define up to 8 distinct automated cycles.
Continue holding while pressing HOUR and MIN to set the current time of day. Programming :
The timer allows you to set up to 8 different programs (8 ON and 8 OFF pairs).
Plug the unit in and wait 12 hours for the battery to charge, then press the reset button. bnd-50 se36 instructions
The device supports 8 distinct programmable blocks. Each block needs a defined ON time and a defined OFF time. Instruction Manual
Press and hold the "CLOCK" button, then press the "WEEK" button to select the current day. Note: Ensure the time format is correct (AM/PM). 3. Programming Your BND-50 SE36
to cycle through day combinations (e.g., individual days, weekdays, weekends, or all 7 days). to set when the device should turn on. Set Off Time again to see "1 OFF." Repeat the steps to set the turn-off time. to return to the main display. панда електроникс Operating Modes (or ON/AUTO/OFF) button to cycle through modes: : The outlet is permanently on. : The outlet is permanently off. : The timer will follow your programmed schedule.
13A / 3120W (or up to 16A / 3500W depending on regional regional variations like the SE36A) Minimum Time Interval: 1 minute Backup Battery: Internal rechargeable Ni-MH battery Phase 1: Initial Hardware Initialization The is a weekly digital timer socket designed
This feature helps with home security by randomly turning lights on and off to simulate occupancy.
The HBN BND-50/SE36 Digital Programmable Timer Go to product viewer dialog for this item.
: Installation, electrical wiring, and commissioning of the SE36 must only be carried out by qualified and authorized personnel. Working with industrial sensors and electrical outputs involves risks of high pressure and electrical hazards; therefore, the manufacturer's technical manual and local safety regulations must be followed strictly.
Repeat the steps to set the day(s) and time you want the timer to turn off. Step 3: Programming Custom ON/OFF Schedules BND-50/SE36 Go
You must set the current day and time before the timer can operate on a schedule.
| Problem | Likely Cause | Fix | |--------|---------------|------| | Plate doesn’t seat flush | Undercoating or rust not fully removed | Grind pocket again | | Bolt spins when torquing | Weld nut inside chassis broken | Cut access, weld new nut | | Vibration at 70+ mph | Bushings misaligned or poly too stiff | Reindex subframe, try rubber bushings | | Cracking around plate edge | Insufficient weld penetration | Weld reinforcement gusset |
Before plugging the timer into a wall outlet, it is crucial to charge the internal battery. Insert the timer into a standard V AC wall outlet. Charge Time: Allow the unit to charge for at least
: Contains the rechargeable Ni-MH battery , which maintains settings during short power interruptions. Avoid short-circuiting or disassembling it.
Regular calibration and maintenance are essential to ensure the BND-50 SE36 continues to provide accurate results. Follow these guidelines:
