Programming the drive requires entering the parameter group menu via the keypad. Press the key to start. Basic Configuration Parameters Parameter Code Function Name Recommended Default Description P0.01 Source of Run Command 0 (Keypad control) 1 for terminal control, 2 for Modbus. P0.03 Max Output Frequency 50.00Hz / 60.00Hz Matches the motor rated frequency. P0.07 Frequency Source 0 (Keypad digital) 1 for analog AI1, 2 for AI2 potentiometer. P0.11 Acceleration Time 1 10.0s (Adjustable) Time to accelerate from 0Hz to max speed. P0.12 Deceleration Time 1 10.0s (Adjustable) Time to decelerate from max speed to 0Hz. P1.00 Motor Rated Power Model dependent Enter value directly from motor nameplate. ⚠️ Troubleshooting Common Fault Codes
Here are the key safety rules extracted from the manual:
Handles baseline settings like the primary control mode selection, maximum output frequency thresholds, and frequency source routing. Invt CHE100 Inverter User Manualpdf
The manual contains critical safety warnings, such as:
The manual provides exhaustive wiring diagrams and terminal descriptions. Key points for installation include: Programming the drive requires entering the parameter group
: Error codes (fault info) and corrective actions. Technical Features
Output terminals connected directly to the three-phase AC motor. Check incoming power lines and fuses
💡 : The CHE100 series is considered a legacy product. For newer installations, INVT typically recommends the Goodrive series (e.g., GD20 or GD100) as a modern replacement.
No. The CHE100 is a distinct series. While some parameters overlap with the GD100 (a more basic model), the CHE100 has additional functions like PID, Modbus, and vector control. Always use the dedicated CHE100 manual.
Check incoming power lines and fuses; ensure stable supply voltage. Inverter / Motor Overload Prolonged operation beyond rated capacity; mechanical jam.
• Ambient temperature too high.• Cooling fan blocked or broken.• Heatsink accumulated dirt.