Digi Sm-500 Scale User Manual !link! Instant

Remove the empty cardboard core and any remaining backing paper from the take-up rewind rewind spool.

Proper physical installation prevents measurement errors and hardware damage. Placement and Leveling

Expandable PLU capacity supporting thousands of items.

Poor print quality or missing vertical lines indicate a dirty print head. Turn off the power switch. Open the printer housing and unlock the print head. digi sm-500 scale user manual

High-speed thermal print head supporting labels, receipts, and linerless paper.

Place the scale on a stable, level surface. Ensure there is no air flow or vibration nearby, as this can cause reading fluctuations.

Press the green release lever to open the thermal print head assembly mechanism. Pull out the label cassette holder. Remove the empty cardboard core and any remaining

Plug the power cord into a grounded electrical outlet. Avoid sharing the circuit with heavy refrigeration equipment to prevent voltage surges.

Frequent calibration is necessary to ensure accuracy.

The user manual dedicates a significant section to maintenance, as scale longevity depends on it. Poor print quality or missing vertical lines indicate

Press or [END] to save and exit the specific item record. 6. Maintenance and Cleaning

Before operating the Digi SM-500, it is essential to understand its physical layout and technical capabilities. Key Components The stainless steel weighing surface.

Press the key once to align the label gaps with the internal optical registration sensor. 6. Troubleshooting Common Error Codes Error Message / Symptom Primary Root Cause Actionable Troubleshooting Step E-01 / Zero Stability Error Unstable surface or platter obstruction.

Before use, the scale must be placed on a flat, stable surface. Operators should check the integrated level bubble and adjust the feet until it is centered.

Slide a new roll of genuine Digi thermal labels onto the supply spindle.