This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
To get the most out of your Biosystems BTS 350, follow these user manual tips:
Define the temperature setting (typically 37°C for enzymes).
| Display | Meaning | Action | |---------|---------|--------| | FAULT | Sensor failure or missing | Remove/replace sensor | | CAL ERR | Calibration failed | Repeat cal with fresh gas | | BATT LOW | Battery voltage low | Replace batteries immediately |
Even with diligent maintenance, issues can arise. The user and service manuals are the first resources for problem-solving. Based on troubleshooting discussions from professional forums, here are some common problems and suggested solutions. biosystems bts 350 user manual
Perform a comprehensive cleaning of the optical system. 5.2. Troubleshooting Guide
: Utilizes a patented LED-based maintenance-free light source with a range of 340–670nm. It includes 8 standard filters and extra positions for optional wavelengths.
The BioSystems BTS-350 is a intended exclusively for in vitro diagnostic (IVD) use in professional laboratories. It represents a new generation of instruments in its class, optimized for both biochemistry and turbidimetry —a key differentiator as it is uniquely designed to handle the specific photometric demands of both applications.
The BTS-350 is a professional medical device and must be used with appropriate caution. This public link is valid for 7 days
Guide you on . Share public link
Avoid direct contact with skin and mucous membranes. Flush immediately with copious amounts of water if an accidental spill occurs. Electronic Safety and Disposal
The BTS 350 provides tools to ensure accuracy and compliance.
Use specific BioSystems calibrators. Select the desired technique from the menu and perform a "Water Blank" or "Reagent Blank" as prompted. Can’t copy the link right now
Wash the flow cell with distilled water after every work session. Never leave reagents or serum sitting in the tubing overnight.
: Features a backlit graphic LCD screen (320x240 pixels) and a tactile membrane keyboard. Built-in Printer
Annual
8-position filter wheel (340, 405, 505, 535, 560, 600, 635, and 670 nm).