Assembly Instructions Better: Babi Italia Parkland Convertible Crib

: Every few months, check the bolts to ensure they haven't loosened from normal everyday use.

Inspect all fasteners to ensure they are tight. Loose hardware is a major strangulation and entrapment hazard. Conversion Options Toddler Bed:

Use your Allen wrench to unscrew and completely remove the .

Clean the solid wood surfaces using only a soft cloth dampened with warm water. Avoid commercial glass cleaners, abrasive chemical scrubs, or harsh furniture polishes, which can strip away the non-toxic protective topcoat. : Every few months, check the bolts to

A little regular care will keep the crib looking beautiful and functioning safely for years.

Used exclusively to secure the mattress support brackets.

use power drills, as they can strip the wood or over-tighten the bolts. Hardware Components: Conversion Options Toddler Bed: Use your Allen wrench

: Attach the stabilizer bars to the headboard and footboard. You will need to insert barrel nuts into the pre-drilled holes of the bars and then secure them with bolts. Install Mattress Support : Open the support brackets on the metal mattress springs. Attach the spring frame to the side rails using screws.

Go around the entire crib and fully tighten all loose bolts with your Allen wrench.

: Never use power drills; they can easily strip the wood or over-tighten the hardware. Assembly Steps Frame Foundation A little regular care will keep the crib

Tighten these securely, ensuring all four corners are set to the exact same height level. Step 4: Attach the Front Footboard

: Ensure you have barrel nuts, Allen head bolts (typically 2", 2-1/2", and 3" lengths), and washers. Step-by-Step Assembly Guide 1. Prepare the Ends

Attach the side rails to the headboard and footboard using the provided screws and/or bolts.

Securely thread the bolts into place using the Allen wrench. Step 5: Final Tightening and Safety Inspection

Before grabbing your tools, clear a large work area in the nursery. Assembling the crib directly in the baby's room prevents the headache of trying to squeeze a fully built frame through a narrow doorway. Lay down a blanket or a piece of the cardboard packaging to protect your hardwood floors or carpets from scratches. Required Tools (Usually included, size M4) Flathead Screwdriver (For positioning barrel nuts)