Xprinter Xp-c260m Driver Page

Go to > Devices and Printers (or Settings > Bluetooth & devices > Printers & scanners ).

By following this guide—downloading only from official sources, matching your OS architecture, and methodically troubleshooting errors—you will eliminate 99% of printer downtime.

Windows is the most common operating system for POS terminals. Follow these steps to install the driver via USB: Step 1: Prepare the Hardware Connect the XP-C260M to a power outlet and turn it on. Load a roll of 80mm thermal paper into the paper slot. Connect the printer to your computer using a USB cable. Step 2: Run the Installer Extract the downloaded .zip file if necessary.

How is the printer connected to your device? ( or Network/LAN ) xprinter xp-c260m driver

Make sure to select the driver that matches your operating system (Windows 7/10/11) and connects via the interface you are using (USB or LAN). Step-by-Step Installation Guide (Windows) Follow these steps to install the Xprinter XP-C260M driver Go to product viewer dialog for this item.

Go to > Advanced to set the default paper size to 80mm x 297mm or your specific roll length.

If a small slip of paper prints out clearly, your installation is successful. 4. Configuring Advanced Settings Go to > Devices and Printers (or Settings

Most users deploy the XP-C260M on a Windows-based POS terminal. Follow these steps for a clean installation:

A prompt will appear asking to configure the port. If using USB, select the active virtual USB port (e.g., USB001 or USB002 ). Click to complete the setup. Step 4: Configuring the Printer Settings

A: No, the XP‑C260M is designed for 80mm paper rolls. For 58mm paper, consider the Xprinter XP‑C260K or other 58mm models. Follow these steps to install the driver via

The Complete Guide to Downloading and Installing the Xprinter XP-C260M Driver

USB + LAN (standard on the C260M variant) Auto-Cutter: Full or partial cut Emulation: ESC/POS command compatible Where to Download the Official Driver

If you have a cash drawer connected to the printer via the RJ11 port, the driver controls its kick-out signal:

This POS printer includes an auto-cutter, a cash drawer port, and supports a wide range of barcodes, including 2D codes like QR codes and PDF417.

Mac deployments require adding the printer via the Common Unix Printing System (CUPS) interface.