Connecting your PC to the XC2 hardware for the first time requires careful step-by-step synchronization.
). This asynchronous system is designed for single, dual, and full-color LED modules. Software Download Information Primary Software: Xshow LED Editor
The official software used to program and manage the XC2 controller is XShow LED Editor (also referred to as Listen Vision software). Micro Robotics Official Software: X Show LED Editor Download (via Listen Vision). Alternative Source: Some distributors provide the software via Micro Robotics or similar hardware retail sites. Micro Robotics Quick Setup Guide
Only update the firmware on your XC2 board if advised by the manufacturer. An interrupted firmware flash can brick the controller.
The is a popular asynchronous control card used widely for single and dual-color matrix displays, as well as some seven-color modules. Finding the right software is essential for programming text, graphics, and animations onto your LED signs. Where to Download XC2 LED Controller Software
LED controllers from the "XC" series (often associated with manufacturers like XiChuan or specific control card ecosystems) rely on dedicated configuration programs. Downloading the exact matching version prevents communication errors and hardware glitches. Official Download Methods
The is a universal RGB / RGBW / addressable LED strip controller widely used for DIY lighting projects, PC case lighting, stage lighting, and home ambiance setups. To configure effects, set colors, adjust brightness, or program sequences, you need the XC2 software (also called XC2 LED Control Suite or XC2 Config Tool ).
Before installing, ensure your control PC meets the following minimum specifications: Windows 7, 10, or 11 (32-bit or 64-bit).
This guide covers everything: safe download sources, installation steps, driver setup, common errors, and advanced configuration.
Before downloading any software, it's vital to confirm that your controller is the Listen XC2 Seven Color Asynchronous LED Screen Controller. This is a specialized hardware unit, not to be confused with unrelated software with a similar name.
Offers , including Indian regional languages. Download and Installation Guide
XC2 LED controller is typically managed using the X Show LED Editor (also referred to as
Download HDPlayer / LEDVision Official Client (Note: Ensure you select the version compatible with XC series cards).
The XC2 LED controller software is compatible with the following operating systems:
Control your LED displays remotely via LAN, Wi-Fi, or 4G cloud connections.
Depending on the exact hardware revision, the XC2 controller typically configures through standard industry suites like LedArt , HD2016/HD2018 , or proprietary XC Play software.
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Faulty USB cable or incorrect driver installation. | Try a different USB cable. Check your computer's Device Manager to ensure the controller's driver is installed without any warning icons. | | "Communication Failed" error appears. | Incorrect communication port (COM port) or network IP settings. | In the "Screen Parameter Settings", double-check the selected COM port and baud rate. For network, use the "Search" button to locate the device. | | Default password "888" does not work. | The password may have been changed by a previous user. | Try the secondary password 168 . If neither works, you may need to contact technical support for a password reset procedure. | | Screen displays garbled or distorted text. | Mismatched screen width/height or scanning settings. | Re-enter the "Screen Parameter Settings" and verify your display's exact specifications. An incorrect scan number (e.g., 4-scan vs 16-scan) is a common cause of this issue. | | Can the XC2 software run on Windows 10/11? | Older software compatibility. | Yes, many users report success running LED Player 6.0 on modern Windows systems. If you encounter issues, try running the program in Windows 7 or Windows XP compatibility mode (right-click the .exe → Properties → Compatibility). |
Do not run the installer from inside a zipped folder. Right-click the downloaded archive and select to create a standard folder on your desktop. Step 2: Run as Administrator
Add your internet radio station on radioguide.FM and create your own station page. Increase your exposure worldwide!
Add your station nowListen to all your favorite music by choosing your favorite genre on Radioguide.FM. Jazz, Rock and Classical music one click away.
Browse genresAll your favorite radiostations just one click away. Just choose your favorite radiostation and listen to the best radio stations in the world.
Start usingWould you like to have your own station on radioguide.fm?
Sign up now and promote your station
to a worldwide audience.
