If your V380 camera uses an Anyka AK3918E processor, standard OpenIPC might not support it perfectly. Instead, various GitHub repositories host custom boot scripts and rootfs modifications specifically for Anyka chips. Anyka-based V380 dome or bulb cameras.
It's worth noting that even if you don't install custom firmware, your V380 camera may already be communicating with remote servers. Users concerned about this can implement network-level restrictions: "I restricted the device's external IP connection on my router. After doing this, the app and software will lose functionality, but I use Synology's recording function to replace the app's functionality, so convenience is not greatly affected".
Below is a template text you can use if you are documenting a project or seeking help in a forum: v380 custom firmware
Developing custom firmware can breathe new life into devices like the V380 IP camera, enabling features not supported by the manufacturer or enhancing security and functionality. However, due to the complexity and risks involved (like bricking the device), it should be approached with caution and thorough preparation.
The most common "custom" modification is unlocking local streaming protocols that are often disabled by default in newer "Pro" models. If your V380 camera uses an Anyka AK3918E
Are you comfortable to look at the internal circuit board chips?
For more advanced modifications, you may need to use the patchv380 tool to build your own custom firmware patches after extracting the original files from a vendor's .patch file. It's worth noting that even if you don't
Stock V380 cameras are designed to lock you into an ecosystem. Custom firmware breaks those chains.
Carefully open the casing and look at the text printed on the largest square microchip on the motherboard.
dd if=firmware.bin of=rootfs.squashfs bs=1M skip=16 unsquashfs rootfs.squashfs
Download the binary from the releases page or clone and build with cargo Step 2: Use patchv380 read to extract files from an existing firmware patch Step 3: Use patchv380 write to create a custom patch with your modifications Step 4: Copy the generated .patch file to /sdcard/updatepatch/ Step 5: Create /sdcard/localupdate.conf with content: [PATCH] patchmd5=??? Step 6: Insert the SD card and restart the camera