Yokogawa Gyro Compass Cmz - 700 User Manual //free\\

Gyro compasses naturally experience errors due to the Earth's rotation and the ship's speed. To ensure accurate true-heading output, operators must input manual or automatic correction values.

The system uses approximately 44 command codes to manage various functions through the operation unit: Yokogawa CMZ 700/900 Command Functions - Compass - Scribd

| Parameter | Value | |-----------|-------| | Master unit weight | 8.5 kg | | Dimensions (WxHxD) | 240 x 180 x 210 mm | | CDU weight | 2.0 kg | | Ingress protection | IP56 (master unit), IP44 (CDU) | yokogawa gyro compass cmz 700 user manual

Digital and analog steering repeaters distributed across the bridge, wings, and steering gear room to mirror the master heading. 2. Technical Specifications Specification Settling Time Within 4 hours (Static) Settle Heading Accuracy Dynamic Accuracy (under standard rolling/pitching) Maximum Follow-up Speed 30° per second Permissible Latitude Range 70°S to 70°N (Extended models handle higher latitudes) Output Signals IEC 61162-1 (NMEA 0183), 1x/step, or synchro signals 3. Standard Operating Procedures

Turn the power switch on the control panel to ON . The system will begin its automatic initialization and run an internal self-test. Gyro compasses naturally experience errors due to the

Contains the sensitive gyroscope element, container unit, and damping fluid.

Confirm that the cooling fans or ventilation ducts around the unit are clear of obstructions. The system will begin its automatic initialization and

Check the internal heater element and ambient bridge ventilation. 7. Technical Specifications Reference Within 4 hours (at latitude 0 to 60 degrees)

The manual’s chart shows exactly which dipswitch (SW2-1 through SW2-4) controls this.

When automatic GPS or log data is unavailable, operators must input values manually to correct for speed and latitude errors: Press the key on the control panel.

Replace the damping fluid, gaskets, and sealing rings during the sphere service to prevent leaks. Troubleshooting and Error Codes