Take apart your Huawei modem/router and locate the two "boot" pins.

Every specific modem model has a dedicated hardware test point (a small copper pad on the board) used for emergency factory flashing.

: Forces unbootable HiSilicon Balong-powered modems into an active download state.

Unplug the device entirely from all power sources and USB cables.

Disclaimer: Flashing firmware can permanently damage your device if done incorrectly. This tool is intended for advanced users. Always backup original firmware when possible.

is an emergency recovery tool specifically designed for Huawei LTE modems and routers equipped with Balong chipsets, such as the V2R7, V7R11, and V7R22. Often used as a last resort, this utility allows technicians and advanced users to revive "bricked" or unresponsive devices by loading a temporary bootloader file ( usbloader.bin ) through an emergency serial port. Key Features of Balong USB Downloader v1.0.1.10

: Disassemble the device and solder wires to the appropriate test points as shown in reference diagrams.

Which are you currently using to run the tool?

Use (Huawei Image Download Tool) or IDT for Balong – similar but sometimes works when Balong Downloader fails on handshake.

: Unlike the original C-based utility, this version is rewritten for Windows stability while maintaining the core logic for the BOOT_3G protocol. How to Use the Tool for Huawei Modem Repair

The tool primarily targets Huawei USB modems and mobile Wi-Fi routers powered by Balong chipsets, including: Balong V2R7, V7R11, and V7R22.

It detects the specific VID/PID combination when the device is put into Download Mode. Prerequisites: Before You Start Before using the tool, ensure you have the following:

You can render an image from the signature JSON text on the server. The following shows how to do this in .NET 4.5 C#, thanks to Daniel Knight. You would call this code as follows and it returns a base64 encoded byte array as a string:

GetBase64Png(jsonEncoding, width, height);

using System;
using System.Collections.Generic;
using System.Web.Script.Serialization;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.Web.Http;

public class GraphicsController : ApiController
{
	[HttpGet]
	[ActionName("GetBase64Png")]
	public string GetBase64Png([FromUri] string linesGraphicJSON, [FromUri] int width, [FromUri] int height)
	{
		return Draw2DLineGraphic(new JavaScriptSerializer().Deserialize<Signature>(linesGraphicJSON), width, height);
	}

	private string Draw2DLineGraphic(I2DLineGraphic lineGraphic, int width, int height)
	{
		//The png's bytes
		byte[] png = null;

		//Create the Bitmap set Width and height
		using (Bitmap b = new Bitmap(width, height))
		{
			using (Graphics g = Graphics.FromImage(b))
			{
				//Make sure the image is drawn Smoothly (this makes the pen lines look smoother)
				g.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;

				//Set the background to white
				g.Clear(Color.White);

				//Create a pen to draw the signature with
				Pen pen = new Pen(Color.Black, 2);

				//Smooth out the pen, making it rounded
				pen.DashCap = System.Drawing.Drawing2D.DashCap.Round;

				//Last point a line finished at
				Point LastPoint = new Point();
				bool hasLastPoint = false;

				//Draw the signature on the bitmap
				foreach (List<List<double>> line in lineGraphic.lines)
				{
					foreach (List<double> point in line)
					{
						var x = (int)Math.Round(point[0]);
						var y = (int)Math.Round(point[1]);

						if (hasLastPoint)
						{
							g.DrawLine(pen, LastPoint, new Point(x, y));
						}

						LastPoint.X = x;
						LastPoint.Y = y;
						hasLastPoint = true;
					}
					hasLastPoint = false;
				}
			}

			//Convert the image to a png in memory
			using (MemoryStream stream = new MemoryStream())
			{
				b.Save(stream, ImageFormat.Png);
				png = stream.ToArray();
			}
		}
		return Convert.ToBase64String(png);
	}

	public class Signature : I2DLineGraphic
	{
		public List<List<List<double>>> lines { get; set; }
	}

	interface I2DLineGraphic
	{
		List<List<List<double>>> lines { get; set; }
	}
}

A full list of all possible settings is shown below. Note that not all would apply in all cases. For more detail see the documentation reference page.

$(selector).signature({
	background: '#ffffff', // Colour of the background
	color: '#000000', // Colour of the signature
	thickness: 2, // Thickness of the lines
	guideline: false, // Add a guide line or not?
	guidelineColor: '#a0a0a0', // Guide line colour
	guidelineOffset: 25, // Guide line offset from the bottom
	guidelineIndent: 10, // Guide line indent from the edges
	// Error message when no canvas
	notAvailable: 'Your browser doesn\'t support signing',
	scale: 1, // A scaling factor for rendering the signature (only applies to redraws).
	syncField: null, // Selector for synchronised text field
	syncFormat: 'JSON', // The output respresentation: 'JSON' (default), 'SVG', 'PNG', 'JPEG'
	svgStyles: false, // True to use style attribute in SVG
	change: null // Callback when signature changed
});

$.kbw.signature.options // Access settings for all instances

$(selector).signature('option', settings) // Change the instance settings
$(selector).signature('option', name, value) // Change an instance setting

$(selector).signature('option') // Retrieve the instance settings
$(selector).signature('option', name) // Retrieve an instance setting

$(selector).signature('enable') // Enable the signature functionality
$(selector).signature('disable') // Disable the signature functionality

$(selector).signature('destroy') // Remove the signature functionality

$(selector).signature('clear') // Erase any signature
$(selector).signature('isEmpty') // Determine if there is no signature
$(selector).signature('toDataURL') // Convert the signature to an image in a data: URL
$(selector).signature('toJSON') // Convert the signature to JSON
$(selector).signature('toSVG') // Convert the signature to SVG
$(selector).signature('draw', sig) // Re-draw the signature from JSON, SVG, or a data: URL