Mtk Bypass Tool Handshaking Error Fix Official

or

Turn off the phone. Hold Volume Up + Volume Down , then insert the cable.

The (e.g., MT6765, Helio G90, Dimensity 700) if you know it. mtk bypass tool handshaking error fix

Physical connection issues are a frequent cause of handshake failures, yet they are the easiest to fix.

The most common cause of handshake failure is simply not entering BROM mode correctly. Take your time with the button sequence, ensure your device is truly powered off, and verify that drivers are installed properly. With patience and methodical testing, you'll likely resolve the issue and successfully bypass the bootrom protection on your MediaTek device. or Turn off the phone

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | STATUS_HANDSHAKE_FAIL | No response from device | Fix 3 (USB 2.0), Fix 4 (Timing) | | Error: 0x1a | Device sent wrong ACK | Driver mismatch – reinstall VCOM. | | STATUS_BROM_CMD_FAIL | BootROM is locked | Test point (Fix 5) or downgrade firmware. | | BROM_ERROR: S_SECURITY_AC | Authentication required | Bypass tool didn't load correctly – use Linux. | | HANDSHAKE: Retry limit reached | Intermittent connection | Change USB cable and disable selective suspend. |

: Use the original factory cable or a high-quality data-sync cable. Charging-only cables will fail the handshake immediately. Tools and Resources LibUSB-Win32 Physical connection issues are a frequent cause of

Add the entire MTK Bypass Tool folder to the antivirus exclusion list. Disable real-time protection temporarily.

Hold Volume Up only, then insert the cable.