Keep the TV powered on until the installation finishes and the TV reboots. Step 5: Perform a Factory Reset
Go to Settings > General > System Manager > Start Setup . Do you see an option for "Set up later" or "Use Smart TV features only"? Select that. If not, connect the TV to WiFi before the antenna setup to bypass the broadcast requirement.
Select this if you are using an indoor or outdoor rooftop antenna.
Tip: Inspect the cable for damage and ensure it's not loose. 2. Correct the DVB Type in Settings
During the initial setup, pay close attention to the and select your correct regional digital standard. Summary Troubleshooting Checklist Action Item What It Fixes Time Required Cold Boot System memory glitches Cable Reseat Weak or missing physical signal Auto Tuning Incorrect DVB source type profile HDMI Toggle Frozen input sensor loop Factory Reset Deep Tizen OS software corruption 10 minutes dvb select type error samsung tv
In rare cases, the internal tuner might fail, often indicated by an inability to find any channels despite correct settings. Step-by-Step Fixes for DVB Select Type Error
Inspect the copper pin in the center of the cable; ensure it is straight and not bent.
Outdated software can cause compatibility issues with local digital broadcast streams. Open the menu. Scroll down to Support . Select Software Update . Click Update Now .
You selected the correct DVB type, but the scan finds zero channels. Try these fixes: Keep the TV powered on until the installation
: The TV is configured to scan for terrestrial airwaves (DVB-T) when it is actually plugged into a digital cable box (DVB-C) or satellite dish (DVB-S).
If you want, tell me the TV model and your signal type (antenna, cable, satellite) and I’ll provide model-specific menu steps and recommended frequency/operator settings.
: Unplug and firmly reconnect the coaxial cable from the wall to the back of the TV or set-top box.
: Ensure the main antenna or cable line is screwed tightly into the "ANT IN" port on the back of the TV. Select that
When your Samsung TV displays a "DVB Select Type Error," it means the television’s software cannot communicate with the tuner broadcast settings or the incoming signal profile does not match the configured region. This mismatch prevents the TV from processing the channel scan. Step 1: Change Your TV Source Settings
. This often manifests as an inability to find channels or a persistent "New DVB Service Located" notification. JustAnswer Common Causes Outdated Hardware
The "DVB Select Type" error on a Samsung TV typically occurs when the television's internal digital tuner (DVB) is set to the wrong signal type or is attempting to scan for channels on an incompatible input .