Aodelan Wtr2 User — Manual ^new^
If you want to dive deeper into custom configurations, please let me know:
Understanding the physical layout of your transmitter and receiver ensures quick adjustments in the field. Transmitter (Timer)
Automatically takes a group of photos at varying exposure times—perfect for HDR astrophotography. Chris Kendrick Photography Quick Tips
Disclaimer: This guide is based on standard features of the Aodelan WTR2 series. Always refer to the physical safety leaflets included in your package for country-specific electrical safety regulations.
The WTR2 chirped. A high, piercing sound that cut through the low hum of the station's life support. The screen blazed to life, bright blue text glowing against the black background. aodelan wtr2 user manual
This dictates the amount of time the device waits before taking the very first picture.
: The total number of frames to capture (1 to 199 or infinite).
Press and hold the Power Button on both devices. The transmitter's LCD screen will light up. The receiver's LED will flash green.
Once you have configured your timer settings (DELAY, LONG, INTVL, N, BKLN), follow these steps to run the sequence: If you want to dive deeper into custom
Connects directly to the camera's shutter release port.
"Copy that, Base," Elias said, a smile touching his lips. "Standing by. WTR2 is online."
The exposure time is controlled manually by the photographer—there is no internal timer in this basic Bulb mode. For precise timed long exposures, use the instead (see Section 6).
However, I can help you in other ways:
Requirement: Your camera body must be set to "BULB" mode for this feature to work. Range: 0 seconds to 99 hours, 59 minutes, 59 seconds. INT (Interval Timer) Sets the exact time gap between consecutive shots.
Change the channel code to bypass local interference. Replace the receiver batteries.
What are you pairing with the WTR-2?
For long exposures, night photography, and ND filter work. Always refer to the physical safety leaflets included
Located on the bottom for mounting to tripods or brackets. 🔌 Initial Setup and Connection