. This is the most common driver for Chinese-made programming cables. For Genuine Cables : If you purchased an RT Systems Programming Kit
Follow these steps to install the driver cleanly and avoid the dreaded "Error Code 10" (Device cannot start). Method A: Using the Executable Installer (Recommended) your programming cable from the computer.
If you found this guide helpful, let us know in the comments below! wln kd-c1 usb driver
: Found in many "no-name" cables. You can download the CH341SER driver from sites like Cape Avionics or the manufacturer's site.
: Adjusting squelch levels and power settings to extend battery life. Conclusion Method A: Using the Executable Installer (Recommended) your
Before downloading any drivers, it is critical to understand that the on the side of the WLN KD-C1 is for charging only . To program the radio, you must use a specialized programming cable that plugs into the 3.5mm and 2.5mm "K-type" audio jacks on the side.
Click > Upload To Radio to save your new configuration. Option B: WLN Official Software You can download the CH341SER driver from sites
Knowing which chip your cable uses determines which driver you need to install. If you are unsure, it is safe to try the CH340 driver first, followed by the Prolific driver if the first one fails. Step-by-Step Guide to Installing the WLN KD-C1 USB Driver
Here's what you need to know:
Which (CHIRP or factory software) are you trying to use?