Map specific functions (like scan, nuisance delete, or power level) to the radio's physical programmable buttons.
Loose cable connection, insufficient power supply to the radio, or data corruption.
Configure sub-audible tones to eliminate unwanted interference from other users sharing the same channel. motorola gm360 programming software
Expand the section to identify which COM Port number (e.g., COM3) has been assigned to your programming cable. Launch the Motorola Professional Radio CPS.
The (USB or Serial/DB9) you are using.
However, the programming software is a . You cannot use modern plug-and-play methods. You need a vintage Windows XP laptop and the patience to manage legacy serial ports.
The official software used to program this radio is the . Map specific functions (like scan, nuisance delete, or
Legacy versions were built for Windows XP, Windows 7, and Windows 8. Running the software on Windows 10 or Windows 11 often requires running the application in Compatibility Mode as an Administrator. Required Hardware and Setup
This is not the same as the "GM300" software (RSS) and it is not the same as the newer "Mototrbo" CPS. The GM360 sits in the "Professional Series" (Waris) family, alongside the GM340, GM380, and PM400. Expand the section to identify which COM Port number (e
: Stop and save this original file. Click File -> Save As and name it GM360_Original_Backup.cp . This allows you to restore the radio if you make a mistake. 4. Modifying Channels and Frequencies
: Configure up to 255 channels with specific transmit (TX) and receive (RX) frequencies, channel spacing (12.5/20/25 kHz), and power levels (1–25W).