Power Washer Instructions New |work|: Rok

: Attach the top handle using the provided screws and slide the hose/cable hooks into their designated slots on the back.

Before you begin, inspect the package to ensure all components are included. A typical ROK power washer package includes: Main Power Washer Unit Spray Gun/Wand High-Pressure Hose Nozzle Tips (varying angles) Detergent Tank (if equipped) Water Intake Filter

The motor/engine and pump assembly.

Attach your garden hose to the water inlet adapter on the machine. 2. Pre-Operation Setup (Crucial) rok power washer instructions new

Once the engine starts up, smoothly slide the choke lever back to the position. 5. Understanding the Color-Coded Nozzles

Screw or click the gun holder into place.

Pull back the quick-connect brass collar at the end of the lance. : Attach the top handle using the provided

to water inlet:

The high-pressure stream can cause severe injection injuries that require immediate medical attention.

Switch back to a high-pressure nozzle (such as the Green 25° nozzle) to rinse the soap away from the top down. 6. Essential Safety Rules Attach your garden hose to the water inlet

When finished, turn off the machine, turn off the water tap, and squeeze the trigger one last time to release the internal pressure before disconnecting hoses.

: This is the most important step. With the machine OFF , squeeze the spray gun trigger until a steady stream of water (and no air) flows from the nozzle.

To prolong the life of your pump seals and internal components, never just flip the switch off and walk away.

Thread your garden hose tightly into the water inlet interface on the power washer pump.

Snap the onto your spray wand. The machine will automatically drop in pressure to draw the detergent.