Woodzig Model 40268 Manual Fixed Site

You can order these from:

Do you need assistance finding a of the original manual?

: Tighten the tensioning system until the lowest cutter links solidly contact the underside of the bar. woodzig model 40268 manual

The Woodzig Model 40268 is a legacy electric/cordless pruner manufactured by

Proper maintenance is especially important for the Woodzig 40268 because the original Oregon replacement chains are . Keeping your chain sharp and properly tensioned can extend its life significantly. You can order these from: Do you need

Following standard Operator's Manual guidelines for electric pruning tools:

: Ensure the extension cord is unplugged before touching the chassis. Keeping your chain sharp and properly tensioned can

Fit the chain around the drive sprocket and slot the guide bar onto the mounting studs. Guide the chain links into the groove of the bar.

Woodzig Replacement Chains for Models 40266 40267 40268 40269

Regularly check that the chain is not too loose. A properly tensioned chain will not sag below the bar but can be pulled slightly away.

Lightly screw the black side cover knob back into place, but do not fully tighten it yet. Rotate the outer adjustment ring clockwise until the chain sits flush against the bottom edge of the bar. Pull on the chain—it should snap back firmly into the bar track.