Upgrade !!link!! - Satlink Ws-6979 Software

Software cannot upgrade H.264 hardware to H.265 if not already built-in. Where to Find Software

: Power on the Satlink WS-6979 and insert the USB drive into the data service port Access System Settings : Use the physical buttons to navigate to the menu and select the Software Upgrade Confirm Update

: Select the firmware file from the USB list. The device will typically display a progress bar. Do not turn off the device until it restarts automatically, as this can brick the unit. Troubleshooting & Technical Notes Port Compatibility : The

Downloaded from the official Satlink website or a trusted source. Battery Power: Ensure your Satlink is charged above to avoid power loss during the update. Step-by-Step Software Upgrade Procedure (USB Method)

The software upgrade tools are generally designed for Windows operating systems.

You have successfully installed the new software. Now, protect your investment.

Power the Satlink while holding the Menu or Signal button (check the manual if this differs on your specific sub-model).

Use the arrow keys to navigate to the or Tools option. Select Upgrade By USB (or USB Update ) and press OK . Step 4: Execute the Flash Update

Download the official software from the manufacturer's website or an authorized distributor. Power Source:

Power off your Satlink WS-6979. Insert the USB drive into the USB port located on the side or bottom of the device. Power the meter back on. Step 4: Navigate the Upgrade Menu

Visual SAT-Flare Tracker 3D - Online

Thank you for using Visual SAT-Flare Tracker Online
In this page you can track satellites in real time, predict passes and flares.
(the 3D desktop version is still available for download)

This page is interactive so you can change the time by means of the following keys:

[s]	Increase time by 1 second
[S]	Decrease time by 1 second
[m]	Increase time by 1 minute
[M]	Decrease time by 1 minute
[h]	Increase time by 1 hour
[H]	Decrease time by 1 hour
[d]	Increase time by 1 day
[D]	Decrease time by 1 day
[0]	Real time (reset time changes)

More options and commands are available through the ADVANCED button.

Earth Map Legend

Red Line	Satellite's Orbit projected on the ground
Blue Line	Ground Flare Track (it represents the location where the reflection hits the ground, which is where the flare brightness reaches its maximum.
Green Line	Reflected ray that hits the ground generating the flare.
Black Line	Shadow ground track (it represents the location where the satellite can be seen crossing either the Sun disk or the Moon disk)