Press and hold the MENU button for 3 seconds until the display shows L1 .
This comprehensive 10-page manual is a summary based on official Life PROBO PR70 documentation. For detailed diagrams, specific programming instructions, or the latest updates, always refer to the complete Life PROBO PR70 Instructions for Installation, Use and Maintenance manual that accompanies your product.
The integrated receiver uses a secure rolling-code system that stores up to 64 individual remote controllers. Pairing a New Remote Control
The display will show PRG . The motor will automatically cycle the door open and closed once. This measures the weight, friction, and force thresholds of your garage door. Press and hold the MENU button for 3
| Specification | Value | | :--- | :--- | | | PR70-07 / PR70-DL | | Mains Power Supply | 230 Vac 50 Hz | | Motor Power Supply | 24 V dc | | Max. Power | 260 W | | Max. Input | 8.5 A | | Input Power to Line (230V) | 1.2 N | | Thrust | 650 N | | Lubrication | Grease | | Electromechanical End Stops | No | | Encoder | Yes (Built-in) | | Speed | 0.10 – 0.18 m/s | | Work Cycles | 50 % | | Nominal Work Time | 13 min | | Courtesy Light | 24 Vdc (internal) | | Operating Temperature | -20°C to +70°C | | Protection Class | IP20 | | Motor Insulation Class | F | | Assembly | Horizontal ceiling-mounted on dedicated runner | | Dimensions (HxWxD) | 442 x 213 x 142 mm | | Weight | 6.7 Kg | | Max. Leaf Surface Area | 11.5 m² | | Control Unit | RG1 24P / RG1 24 DL |
Clean the inside of the guide rails with a dry cloth to remove dirt buildup. Test the battery backup module if your system utilizes one.
: Always follow safety guidelines provided in the manual to protect yourself and others from potential hazards. The integrated receiver uses a secure rolling-code system
press Power once. The unit flushes internally for 30 seconds before full shutdown. Do not unplug during this cycle.
3A0429C - PR70 with Standard Display Module, Operation - Graco Inc.
Mark a line 50mm above the highest point of the door’s travel arc. This measures the weight, friction, and force thresholds
Remove support brackets and mount the motor onto the runner, ensuring the output shaft fits the block without force.
Lubricate the guide rail chain or belt with silicone spray.
This manual is destined for professional fitters only. Under applicable law, installation may only be performed by professional fitters.