Huawei_LUA-L02_MT6735M_Repack_Done_Dead_Hang_Logo_Fix.zip
Huawei LUA-L02 firmware flash file (MT6735M) – dead, hang on logo, done repack
Power off your Huawei LUA-L02 completely. Remove the battery if possible, wait 5 seconds, and reinsert it. Huawei_LUA-L02_MT6735M_Repack_Done_Dead_Hang_Logo_Fix
using a dedicated MediaTek MT6735M scatter file is the most definitive method to recover a phone stuck in a dead boot status or infinite hang-on-logo loop .
: Reinstall the MTK VCOM drivers and try a different USB port (preferably on the back of the PC for desktops). : Reinstall the MTK VCOM drivers and try
A proper (full ROM, not just an OTA update) contains the following partition images:
The can almost always be recovered from a dead or hang-logo state, provided you use a repacked firmware that bypasses MediaTek's authentication barriers. The days of searching for stock ROMs that fail with STATUS_DA_SOC_CHECK_FAIL are over. A properly repacked scatter file plus a patched Download Agent turns a brick back into a functioning budget phone. A properly repacked scatter file plus a patched
If your device is experiencing a minor boot loop or is stuck on the logo screen, keep it set to .
: The specialized software used to communicate with the phone’s hardware at a low level. MTK VCOM Drivers