Nalco Ultimer 7752 Msds New !!install!! Jun 2026

Flush immediately with plenty of water for at least 15 minutes. Wash thoroughly with soap and water after handling. Ingestion: Do not induce vomiting; give water and seek medical advice. Inhalation: Move to fresh air if mist or vapors are inhaled. Personal Protection:

If your facility uses (a high-molecular-weight anionic polyacrylamide flocculant used in clarification and dewatering), it’s time to review the latest SDS revision. Manufacturers like Nalco Water (Ecolab) periodically update these documents to align with GHS standards (Globally Harmonized System) and new toxicological data.

Unlike standard emulsion polymers that rely on hydrocarbon solvents and heavy surfactants, the ULTIMER® product line features a water-based composition. This reduces the overall environmental footprint and allows the polymer to activate smoothly without requiring advanced make-down equipment or extensive aging periods. Value / Specification Color Odor Mild Chlorine-like pH (100% at 25°C) 3.0 – 4.1 (Mildly Acidic) Pour Point / Freezing Point -5 °C (23 °F) Initial Boiling Point 100 °C (212 °F) Flash Point > 93.3 °C (> 200 °F) via ASTM D 93 Vapor Pressure 20.6 mm Hg at 37.8 °C Hazard Identification & Toxicity Metrics

Understanding the physical nature of ULTIMER 7752 is critical for handling and application: White Liquid Odor: Mild odor pH: Typically in the acidic range ( Flash Point: nalco ultimer 7752 msds new

The modern 16-section SDS format categorizes essential handling, medical, and ecological data: 1. Hazard Identification & Ingredient Composition

Because it belongs to the award-winning, oil-free Ultimer line, it drastically reduces environmental footprints compared to traditional hydrocarbon-based emulsion flocculants. Below is a comprehensive breakdown of the updated SDS/MSDS parameters, chemical behavior, and safe industrial application protocols. 📋 Quick Reference Overview Specification & Classification Source Info Nalco Water, an Ecolab Company Ecolab Profile GHS Hazard Class Not classified as hazardous under normal use Scribd SDS Transport Status Non-regulated / Not restricted for transport PTT GC Chemical Log Acute Oral Toxicity (Low toxicity) Scribd SDS Environmental Hazard Low potential environmental hazard Scribd SDS Primary Composition Water-based acrylamide co-polymer dispersion Ecolab Tech 🔬 Core Chemical Technology & Eco-Benefits

Ranges from 3.0 to 4.1 at 100% concentration, indicating an acidic nature. Solubility: Fully miscible in water. Boiling Point: Approximately 100∘C100 raised to the composed with power C 212∘F212 raised to the composed with power F Flush immediately with plenty of water for at

Pull eyelids open and flush immediately with a steady stream of clean water for a minimum of 15 minutes. Seek medical attention if irritation persists.

Now, I'll start writing the article. I'll integrate the sources appropriately. Comprehensive Guide to Nalco Ultimer 7752: Understanding Its Safety Data Sheet (MSDS/SDS)

This section clarifies the product identifier (Nalco Ultimer 7752), recommended uses (industrial water treatment, solid/liquid separation), and supplier details (Nalco Water, an Ecolab company, often based in Naperville, Illinois). Inhalation: Move to fresh air if mist or vapors are inhaled

: Wash thoroughly with soap and water. Remove contaminated clothing.

Treat symptomatically; if symptoms develop, move to fresh air. Physical Properties: Appearance: White liquid. pH: 3.0 - 4.1 (100% concentration at 25°C). Boiling Point: Approximately 100°C. Flash Point: > 93.3°C. Application and Benefits

: Use with adequate ventilation to ensure safety.

Improving solids capture efficiency in refinery operations.