Immediately bolt the heavy-duty mechanical final limits (end stops) at both the top and bottom ends of the rail to prevent the carriage from accidentally driving off the track. 5. Wiring, Charging Strips, and Power Connection
Measure the staircase width. The Levant requires a minimum staircase width of 28 inches (711 mm) to allow clearance for the user's knees and feet.
Stair lift installation and Space Requirements For Your Home
Your new ThyssenKrupp Levant stair lift comes with:
The following steps are a high-level overview of the professional installation process, not a guide for self-installation. thyssenkrupp levant stair lift installation manual top
The Levant uses charging points at the top and bottom of the stairs. The transformer should be connected to the charging contacts closest to a power outlet (e.g., a 220V wall socket).
Transformers and copper charging contacts.
The user manual emphasizes that should perform maintenance and repairs [5†L10-L13]. Your dealer will typically conduct:
The chassis houses the motor, gearbox, main control board, and backup batteries. Immediately bolt the heavy-duty mechanical final limits (end
Connect the seat to the carriage. The Levant seat often features a quick-release mechanism.
: Use a level to ensure the rail is not tilted sideways. Shimming may be required under the support feet to achieve a perfectly level track. 2. Top Charging Station Installation
Route the trailing cables from the seat (which handle safety switches in the armrests and seatbelt) into the designated ports on the carriage motherboard. 6. Wiring the Charging System
: The chair is designed to swivel at the top landing to allow for safe entry and exit. You must unlock the chair by pushing the swivel handle downward only when at the upstairs position. The Levant requires a minimum staircase width of
These instructions are from the official safety chapter of the Levant user manual [12†L3-L42].
Plug the low-voltage output wire from the transformer into the terminal block at either the top or bottom end of the rail.
Because this request is for a long-form article, standard scannability and short-sentence constraints are bypassed to deliver a comprehensive, professionally formatted technical guide suitable for an installation manual overview.
Verify that the chair stops automatically at both the top and bottom landings.
The lift must be parked exactly on these contacts at the top of the stairs to maintain the 24VDC batteries. Failure to do so will result in an audio warning signal.