Look back at the computer screen. Click the (Start Downloading) in the tool interface.
SPD Upgrade Tool (Research Download Tool): This is the utility used to push the PAC file from your PC to the phone. Step 2: Install the USB Drivers Extract the downloaded USB Driver package. Run the setup file and follow the on-screen instructions.
Remove the back cover and take out the battery for 5 seconds, then reinsert it (do not power the phone on).
Flashing will wipe all personal information from the phone's memory.
Click the (Load Packet) in the top left corner of the tool. Browse and select your .pac firmware file. Start the Process : nokia ta1304 flash file pac file
At least 60% charge to prevent the device from powering off mid-process, which could lead to a permanent brick.
The Ultimate Guide to Nokia TA-1304 Flash File (PAC File) Download and Installation
The tool should recognize the phone, and the flashing process will begin. 5. Finish the Flashing Release the volume button once the flashing starts.
These allow your PC to recognize the phone in "Download Mode". Look back at the computer screen
The flashing tools require a computer running Windows 7, 8, 10, or 11. Required Download Links
Flashing your device can void the warranty. Proceed with caution. Always back up your data if possible, as this process may erase all user data from the device. If you'd like, I can:
Bypassing a forgotten security code (default is 12345 ).
The Nokia TA-1304, commonly known as the Nokia 6300 4G, is a reliable feature phone that blends classic design with modern connectivity like WhatsApp and YouTube. However, like any mobile device, its KaiOS software can occasionally face issues. Whether your device is stuck on the boot logo, experiencing frequent crashes, or you simply want to reset it to factory settings after a forgotten privacy password, using the Nokia TA-1304 flash file (PAC file) is the definitive solution. Step 2: Install the USB Drivers Extract the
If the tool does not react when you plug in the phone, verify your USB drivers. Try using a different USB port (preferably a USB 2.0 port on the back of the PC) or swap the USB cable.
: Ensure you are using the exact firmware for the TA-1304 model to avoid bricking the device.
Press and hold the Boot Key (usually the '*' key or the 'OK' button on Nokia feature phones).