Enter the combination of and AnyDesk . When configured correctly, WoL acts as a digital finger, reaching across the internet to flip the power switch on your remote machine. Once it boots, AnyDesk takes over instantly.
AnyDesk's implementation requires at least one other active device running AnyDesk on the same local network as the sleeping PC to "relay" the Magic Packet. Step-by-Step Configuration 1. Enable WoL in BIOS/UEFI
To implement the AnyDesk Wake on LAN "hot" method, you must enable permissions across three separate layers of your target machine.
The Ultimate Guide to AnyDesk Wake-on-LAN: Accessing Your PC Anytime wake on lan anydesk hot
: Allows you to specify a single ID that is permitted to wake the machine.
:
For AnyDesk to successfully target and wake an offline machine, three distinct configurations must align perfectly. Enter the combination of and AnyDesk
:
: WoL is highly unstable over wireless networks. Use a wired Ethernet connection on the target machine for reliability.
AnyDesk makes this relatively easy if you have a second always-on device on the same network (like a Raspberry Pi, router, or another PC). But for , we need a workaround. AnyDesk's implementation requires at least one other active
To use this feature, your environment must meet several criteria:
Check Allow this device to wake the computer and Only allow a magic packet to wake the computer .
You need a second device (router, VPN, Raspberry Pi, or another PC) on the same LAN as the sleeping computer.