Software Dlms Ashly Protea 48 Jun 2026

Calculate the threshold based on your amplifier's input sensitivity and the continuous power rating (RMS) of your loudspeakers.

Ashly, Protea, and NE are trademarks of Ashly Audio, Inc. All other trademarks are the property of their respective owners.

Apply multiple filters (parametric, low-shelf, or high-shelf) to tame room resonances. Delay: Add input delay for system alignment. 2. Output Section and Crossover Management software dlms ashly protea 48

Speaker manufacturers like Fulcrum have created voicing files (.voc) for Ashly DSP products. These require the Protea Software Suite version 5.49 or later.

Allows any input (A, B, C, D) to be assigned to any combination of the eight output channels. Comprehensive Audio Tools: Calculate the threshold based on your amplifier's input

Uses dedicated RMS/Peak limiters to shield expensive drivers from over-excursion and thermal failure. Setting Up the Protea Software Environment

Essential for dividing frequencies between subwoofers, mid-range drivers, and high-frequency horns. The software supports Linkwitz-Riley, Bessel, and Butterworth topologies with slopes ranging from gentle 12dB/octave to steep 48dB/octave cuts. Apply multiple filters (parametric

: Avoid using unshielded or excessively long USB cables (greater than 15 feet/5 meters) without an active repeater, as this causes data drops during live syncing. Conclusion

Inputs and outputs each have real-time virtual meter displays shown in dBu. Output compressor/limiters have separate meter displays shown in dB. This real-time feedback is essential for live system tuning and troubleshooting.

| Action | Command | |--------|---------| | Get input 1 gain | GET IN01_GAIN | | Set input 1 gain to -10 dB | SET IN01_GAIN -10 | | Mute output 2 | SET OUT02_MUTE 1 | | Recall preset 5 | PRESET 5 | | Get current preset | GET PRESET |

Open the software, and it should automatically detect the 4.8SP.