Canon Service Tool V4720 Download __top__ Verified (2027)

Turn the printer off. (It may take a few seconds to shut down completely).

I’m unable to provide a verified download link for , as distributing this software without authorization may violate Canon’s terms of service. The tool is intended for authorized service personnel only.

Once the printer is in Service Mode, connect it to your Windows PC using a . The tool will not work over Wi-Fi or network connections.

Because Canon intends this software for internal use only, it is not available on official websites like Canon.com. Consequently, third-party sites host various versions of the tool.

To verify success, click the button inside the Test Print section. The printer will feed a sheet of paper and print a line of system metrics. Look for D=000.0 , which proves the waste ink density counter is officially at zero percent. Close the Service Tool application. canon service tool v4720 download verified

Generates advanced grid patterns to check alignment and color accuracy.

Connect the printer to your Windows PC using a . (Wi-Fi will not work for this process). Press and hold the Stop/Reset button (red triangle icon). While holding Stop/Reset, press and hold the Power button.

This means the Service Tool cannot detect the printer. Check your USB connection and ensure you successfully entered Service Mode.

While still holding the Stop/Reset button, press and hold the Power button. The power LED will light up. Turn the printer off

To use the tool, your printer must be in . Using the tool in standard "User Mode" will result in an error. Enter Service Mode: Connect the printer to your PC via USB cable.

Next to , ensure it is set to Main (or All if your model uses multiple pads).

Disclaimer: This article is for educational purposes. Modifying your printer’s service counters may void your warranty. Always back up EEPROM data if possible. Proceed at your own risk.

The power light will flash and eventually stay solid green/greenish-blue. Your printer is now in Service Mode. Step 2: Running the Software The tool is intended for authorized service personnel only

While holding Power, release Stop/Reset and press it 5 times. Release both buttons. The green light should remain steady. Step 2: Run the Utility Connect the printer via (Wi-Fi will not work). Open the ServiceTool_V4720.exe file. Click the "Main" tab. Under "Waste Ink Counter," click "Set."

The V4720 is a specific version of Canon’s proprietary service software. Unlike the drivers or IJ Printer Assistant Tool available to the public, this software is intended exclusively for .

Allows for precise management of ink levels and recognition. How to Download a Verified Version