Locate the small reset button (often a recessed button labeled "R" or "Reset") and press it using a toothpick or paperclip to clear any factory testing memory.
Even with the , problems occur. Use this table:
Once the connections are secured with wire nuts, carefully tuck the wires back into the box and screw the timer into place. Programming and Use
Remove the wallplate and the mounting screws of the existing switch. Pull the switch out from the wall box.
Connect the green/bare Ground wire from the wall box to the GROUND terminal of the timer.
Before buying a new timer, download a fresh to confirm specifications for your replacement.
Most GE digital timers (including the 15086) feature an internal rechargeable battery that maintains the clock and program settings during short power outages. Under normal use, the battery requires no maintenance.
Connect the white neutral wire from the wall box to the white NEUTRAL terminal of the timer.
This article is designed to serve as a complete resource for homeowners, electricians, and DIYers who need to find the manual, understand the wiring, and successfully install the GE 532641L3 timer switch.
Check breaker; ensure white neutral wire is connected securely. Lights do not turn on Incorrect Line/Load wiring Swap the Line (hot) and Load wires on the switch. Programs do not run Switch is not in AUTO mode
If the model-specific manual is still elusive, try these methods:
