Ccna 3 Examen Final De Habilidades De Ensa Ptsa Work -

The CCNA 3 final exam consists of two parts:

Copia la configuración en ejecución ( running-config ) al servidor TFTP.

You must place routers (R1, R2), switches (S1–S4), and end devices (PCs, servers) in the proper rack and table locations before connecting them according to the topology.

no ip domain-lookup logging synchronous exec-timeout 5 30

Router-Active(config)# interface gigabitethernet 0/0/1 Router-Active(config-if)# standby 1 ip 192.168.1.1 Router-Active(config-if)# standby 1 priority 150 Router-Active(config-if)# standby 1 preempt Use code with caution. Listas de Control de Acceso (ACLs) Extendidas e IPv4 NAT ccna 3 examen final de habilidades de ensa ptsa work

vlan 10 name VLAN10 vlan 20 name VLAN20

OSPF inter-area ( O IA ) and default routes ( O*E2 ) are populated. show ip ospf neighbor Neighbor states show as FULL/DR , FULL/BDR , or FULL/DROTHER . NAT Operations show ip nat translations

Define ip domain-name y crea claves RSA ( crypto key generate rsa ). Crea un usuario local con nivel de privilegio 15. En las líneas VTY, usa login local y transport input ssh . Paso 4: Enrutamiento OSPFv2 de Área Única Configura el proceso OSPF (ej. router ospf 1 ). Asigna router-id manuales. Usa sentencias network para anunciar las redes conectadas.

El (Packet Tracer Skills Assessment) es la prueba práctica más importante de la certificación Cisco CCNAv7. Evalúa la capacidad de diseñar, proteger y automatizar redes empresariales complejas mediante simulaciones en entornos lógicos o físicos de Cisco Packet Tracer. The CCNA 3 final exam consists of two

Antes de hacer clic en "Enviar" en Packet Tracer, verifica los siguientes estados utilizando los comandos de diagnóstico correspondientes: Elemento a Verificar Comando de Verificación Resultado Esperado show vlan brief / show interfaces trunk

To succeed in the "examen final de habilidades," you should master the following configuration blocks. 1. OSPFv2 and OSPFv3 Configuration

Define which internal local IP subnets are authorized to undergo translation before passing out to the Internet.

Basic settings must be applied to all routers (R1, R2) and switches (S1–S4) via console connection. Listas de Control de Acceso (ACLs) Extendidas e

: Place PC A and PC B on the right table (Table 2), and PC C and the DNS Server on the left table (Table 1).

Router(config)# interface GigabitEthernet0/0/0 Router(config-if)# standby 1 ip 192.168.10.254 Router(config-if)# standby 1 priority 150 Router(config-if)# standby 1 preempt Use code with caution.

Place Routers (R1, R2) at the top, followed by Switches (S1–S4).

Disable OSPF updates on LAN-facing interfaces to enhance security and reduce traffic.